Engineered Titanium Solutions & Equipment for Chemical Processing

Eliminate severe corrosion failures, reduce operational downtime, and extend critical equipment lifespan by up to 300% in extreme chemical environments.

SCROLL

Solving Critical Corrosion Challenges

Advanced titanium material engineering designed to withstand severe chemical oxidation and localized corrosion where conventional alloys fail.

Chlor-Alkali Processing

Commercially pure titanium (Grade 1 & 2) components optimized for handling wet chlorine, brine electrolysis, and chlorine dioxide without risk of pitting corrosion.

Acid Synthesis Units

Pd-enhanced Grade 7 and Mo-Ni modified Grade 12 titanium alloys built for aggressive nitric, acetic, and high-temperature organic acid environments.

Petrochemical Engineering

Heavy-duty pressure vessels, reactors, and high-pressure titanium piping for refinery desulfurization and PTA production lines.

Marine & Offshore Energy

High-strength Grade 5 (Ti-6Al-4V) and Grade 9 titanium tubing designed for deep-water risers, heat exchangers, and seawater desalination systems.

Engineered Equipment & Mill Products

Fully compliant with ASME Section VIII Div 1, ASTM standards, and ISO 9001 quality management guidelines.

Titanium Shell and Tube Heat Exchanger
ASME / ASTM B359

Titanium Shell & Tube Heat Exchangers

Custom-fabricated Grade 2 & Grade 12 exchangers engineered for maximum heat transfer efficiency in severe cooling systems.

  • Design Pressure: Up to 10 MPa
  • Zero Corrosion Margin Required
  • Full Helium Leak Testing Certified
Get Product Spec Sheet
Grade 7 / Grade 12 Titanium Reactors
ASME Pressure Vessel

Grade 7 / Grade 12 Titanium Reactors

Corrosion-resistant reactor vessels built for aggressive chemical synthesis requiring crevice corrosion resistance above 200°C.

  • Solid Titanium or Titanium Clad Construction
  • Integrated Agitators & Heating Coils
  • 100% Radiographic Testing (RT) on welds
Inquire Reactor Design
Industrial Titanium Piping Systems
ASTM B338 / B862

Industrial Titanium Piping Systems

Seamless and welded titanium pipes, elbows, and flanges engineered for leak-free chemical transfer in toxic media.

  • Sizes: NPS 1/2" to 24" (Sch 10S to Sch 80S)
  • Hydrostatic & Eddy Current Tested
  • EN 10204 3.1 MTR Included
Request Pipe Catalog
Explosive Bonded Titanium Clad Plates
ASTM B898 / ASME SA264

Explosive Bonded Titanium Clad Plates

High-strength titanium-steel clad plates combining superior corrosion resistance with economic structural steel backing.

  • Base Metals: Carbon Steel, Stainless Steel
  • Shear Strength: > 140 MPa
  • 100% Ultrasonic Testing (UT) Bonded Class I
Request Clad Data Sheet

Field-Tested Engineering Success

Discover how Kintonti Metal prevents catastrophic failures and reduces maintenance overhead worldwide.

Chlor-Alkali Sector

Chlorine Cooler Tube Bundle Replacement

Location: Southeast Asia Chemical Complex

Challenge: Recurrent tube leaks every 6-8 months using 316L stainless steel due to severe wet chlorine pitting.

Solution: Engineered direct-replacement tube bundle utilizing ASTM B338 Grade 2 Titanium Seamless Tubes.

4+ Years
Zero-Leak Operation
65%
Maintenance Cost Drop
Petrochemical Processing

Formic Acid Reactor Vessel Upgrade

Location: Middle East Refining Plant

Challenge: Rapid crevice corrosion at flange joints under high-temperature (180°C) organic acid processing with CP Grade 2.

Solution: Upgraded reactor internal lining and connections to Titanium Grade 7 (Ti-0.15Pd Alloy).

3x
Service Lifespan
100%
Inspection Pass-Rate

Titanium Grade Selection Matrix

Technical reference guide for metallurgical selection across chemical media.

Alloy Grade Composition Spec Corrosion Resistance Strengths Best Used For
Grade 1 / Grade 2 Commercially Pure (CP) Outstanding in oxidizing acids, wet chlorine gas, chlorates, and organic solutions. Heat exchangers, storage tanks, chlor-alkali piping, anodes.
Grade 7 CP Titanium + 0.15% Pd Superior resistance to reducing acids (dilute HCl, H2SO4) and localized crevice attack. Pharmaceutical reactors, harsh acid recovery units, severe flange seams.
Grade 12 Ti-0.3Mo-0.8Ni Higher mechanical strength at elevated temperatures (up to 300°C); strong crevice corrosion resistance. Evaporators, high-pressure acid vessels, chemical valve bodies.

Engineering FAQ

Technical insights and alloy guidance from our metallurgy engineering team.

Why is Titanium Grade 7 or 12 preferred over CP Grade 2 for high-temperature acid applications?

Commercially Pure Grade 2 titanium performs exceptionally well in oxidizing acids. However, in hot reducing acids or chloride environments above 100°C, CP titanium can become vulnerable to crevice corrosion. Titanium Grade 7 (Ti-0.15Pd) adds palladium to dramatically increase passivation and eliminate crevice attack. Grade 12 (Ti-0.3Mo-0.8Ni) provides enhanced mechanical strength and crevice resistance at temperatures up to 300°C at a lower cost than Grade 7.

What quality certifications and material test reports (MTR) do you provide with shipments?

Every shipment delivered by Kintonti Metal is supplied with full Material Test Reports (MTR) according to EN 10204 3.1, showing complete chemical composition and mechanical test results. All materials comply strictly with ASTM B265, ASTM B338, ASTM B348, and ASME SB standards. Third-party inspections by SGS, TÜV, or Bureau Veritas are routinely provided upon request.

Can Kintonti Metal fabricate custom titanium pressure vessels according to ASME code?

Yes. Our engineering division custom-fabricates titanium heat exchangers, reactors, and pressure vessels in compliance with ASME Section VIII Division 1 guidelines. We perform comprehensive Non-Destructive Testing (NDT), including 100% Radiographic Testing (RT) on welds, Hydrostatic Testing, and Helium Leak Detection before shipment.

How does titanium eliminate corrosion costs in chlor-alkali production?

Exposure to wet chlorine gas and hot brine rapidly degrades stainless steels and high-nickel alloys via stress corrosion cracking. Titanium automatically forms a highly durable, self-healing oxide passivation film (TiO2) in wet chlorine environments. This prevents pitting, reduces unplanned plant shutdowns, and extends equipment service life by 300% to 500%.

Ready to Start Your Titanium Project?

Get custom quotes, technical specs, and material certifications within 24 hours.