High-Performance Titanium Solutions for Power & Energy Infrastructure

Optimize thermal efficiency, combat severe sea-water corrosion, and ensure uninterrupted operations across thermal, nuclear, solar, and offshore energy plants.

SCROLL

Engineered for High-Stress & Corrosive Energy Systems

Advanced energy-grade titanium mill products engineered to withstand extreme temperatures, pressure differentials, turbulent fluid flow, and harsh chemical environments.

Power Plant Condensers & Heat Exchangers

Commercially Pure Grade 2 and Grade 1 thin-walled welded tubes engineered for steam surface condensers, auxiliary heat exchangers, and cooling systems in fossil and nuclear power plants.

Nuclear Power Generation Infrastructure

Nuclear-grade titanium tubing, forged fittings, and heavy plates conforming to ASME SB-338 and RCC-M standards for secondary loop coolers and steam generators.

Desalination & Offshore Wind Structures

High-strength titanium Grade 7 and Grade 12 plates and tubes designed to resist crevice corrosion in high-salinity seawater evaporators and offshore platform cooling networks.

Turbine Blades & Geothermal Systems

High-tensile Grade 5 (Ti-6Al-4V) titanium forged bars and custom shapes built for low-pressure steam turbine blades and corrosion-resistant geothermal well piping.

Power & Energy Titanium Tubes, Plates & Forged Discs

Fully compliant with ASTM B338, ASTM B265, ASTM B348, ASME SB-338, and ISO 9001 quality management standards.

Titanium Heat Exchanger Tubes ASTM B338 Grade 2
ASTM B338 / ASME SB-338

Grade 2 & Grade 1 Titanium Condenser Tubing

Seamless and welded thin-walled titanium tubes engineered for power station surface condensers and heat exchangers.

  • Outer Diameter: 12.7mm to 50.8mm (WT: 0.5mm - 2.0mm)
  • 100% Eddy Current & Hydrostatic Pressure Tested
  • Exceptional Resistance to Erosion-Corrosion & Silt Impact
Get Product Spec Sheet
ASTM B265 Titanium Tube Sheets and Heavy Plates
ASTM B265 / ASME SB-265

Titanium Tube Sheets & Heavy Plates

Heavy-gauge titanium plates and precision-drilled tube sheets designed for large power plant heat exchanger assemblies.

  • Thickness: 5.0mm to 120.0mm
  • Superior Corrosion Resistance in Brine & Chlorinated Water
  • EN 10204 3.1 Certified & Full Ultrasonic Flaw Inspection
Inquire Sheet Specs
Titanium Grade 7 Alloys for Geothermal and Desalination
ASTM B338 Gr 7 / Gr 12

Corrosion-Resistant Palladium Titanium Alloys

Grade 7 (Ti-Pd) and Grade 12 titanium pipes and plates specifically formulated for severe acidic or high-temperature geothermal brine.

  • Outer Diameter: 15.0mm to 325mm
  • Enhanced Crevice Corrosion Protection in Hot Halide Solution
  • Optimal Choice for MSF/MED Desalination Plants
Request Tubing Catalog
Titanium Forged Rings and Turbine Blade Bars
ASTM B348 / Grade 5

Titanium Forged Bars & Flange Discs

High-tensile Grade 5 (Ti-6Al-4V) forged round bars, rings, and custom forgings for steam turbine blades and high-pressure power piping.

  • Diameter: Up to 400mm Custom Forgings
  • High Strength-to-Weight Ratio & Fatigue Resistance
  • 100% Macrostructure & Mechanical Property Verified
Request Material Data Sheet

Power Plant & Energy Proven Performance

Discover how Kintonti Metal delivers industrial-grade titanium tube and plate solutions for global power plants, energy contractors, and desalination facilities.

Thermal Power Plant Upgrade

Seawater Surface Condenser Retubing Project

Partner: Major Coastal Power Generation EPC Contractor

Challenge: Premature pitting corrosion and biofouling leakage in copper-nickel condenser tubes under harsh coastal seawater cooling conditions.

Solution: Supplied 120+ metric tons of high-purity ASTM B338 Grade 2 Titanium Welded Condenser Tubes with tight OD and wall thickness tolerances.

40+ Yrs
Designed Service Life
0%
Tube Leakage Rate
Desalination Facility

Titanium Tube Sheet & Evaporator Material Supply

Partner: Middle East Multi-Stage Flash (MSF) Desalination Operator

Challenge: Extreme crevice corrosion in high-temperature brine heat exchangers causing costly unscheduled maintenance stops.

Solution: Manufactured heavy ASTM B265 Titanium Grade 12 & Grade 7 Plates and tubes with enhanced palladium addition for superior crevice resistance.

45%
Maintenance Cost Reduction
100%
UT Flaw Pass Rate

Power & Energy Titanium Material Selection Matrix

Technical reference guide for metallurgical selection across power condensers, heat exchangers, nuclear systems, and offshore energy equipment.

Alloy Grade Composition Spec Key Performance Characteristics Best Used For
CP Grade 1 & 2 Titanium Commercially Pure Titanium Maximum ductility, excellent cold formability, complete immunity to ambient seawater corrosion. Power plant surface condensers, auxiliary heat exchangers, plate heat exchangers.
Grade 7 (Ti-Pd Alloy) Ti-0.15Pd Alpha Alloy Exceptional resistance to crevice corrosion in acidic solutions and high-temperature chlorides (up to 250°C). Geothermal steam wells, desalination evaporators, chemical energy heat exchangers.
Grade 12 (Ti-Mo-Ni) Ti-0.3Mo-0.8Ni Alloy Higher strength than CP titanium with improved crevice corrosion resistance at elevated temperatures; lower cost than Gr 7. Nuclear waste processing, heat exchangers, brine heater tube sheets.
Grade 5 (Ti-6Al-4V) Ti-6Al-4V Alpha-Beta Alloy High tensile strength (≥895 MPa), excellent strength-to-weight ratio, and superior fatigue endurance ($4.43 g/cm^3$). Low-pressure steam turbine blades, generator rotor components, high-stress structural fasteners.

Power & Energy Titanium FAQ

Technical insights and metallurgical guidance from our energy materials engineering division.

Why is Grade 2 titanium preferred over Cu-Ni alloys for power plant surface condensers?

Grade 2 titanium exhibits total immunity to pitting, erosion-corrosion, and sulfide attack in coastal seawater environments. Unlike Copper-Nickel alloys, titanium allows higher cooling water velocities (up to 4 m/s) without wall thinning, enabling thinner tube wall designs, higher heat transfer rates, and a maintenance-free lifespan exceeding 40 years.

What is the difference between ASTM B338 Grade 2 and ASME SB-338 Grade 2 tubing?

ASTM B338 is the standard specification for seamless and welded titanium tubes intended for general condensers and heat exchangers. ASME SB-338 adopts the same chemical and mechanical requirements as ASTM B338, but is specifically approved and certified under the ASME Boiler & Pressure Vessel Code (BPVC) for high-pressure power generation applications.

Are Kintonti Metal energy-grade titanium products EN 10204 3.1 certified and NDT inspected?

Yes. All titanium tubes, plates, and forgings for energy applications are produced under strict compliance with ISO 9001 quality management systems. Every batch undergoes 100% Non-Destructive Testing (NDT)—including Eddy Current Testing, Ultrasonic Inspection, and Pneumatic/Hydrostatic Testing—and comes with full EN 10204 3.1 Material Test Certificates (MTC).

Can you provide custom tube sheet drilling, tube bending, and special length specifications?

Yes. We offer precision CNC tube sheet drilling, U-bend tube processing to custom radii, and special lengths up to 18 meters for power plant heat exchanger bundles. Additional services such as beveling, bright annealing, and custom bundle packaging are available upon request.

Ready to Upgrade Your Power & Energy Infrastructure?

Get custom quotes, ASTM B338/B265 technical specifications, and EN 10204 3.1 mill test certificates within 24 hours.