High-Performance Aerospace Titanium Solutions & Structural Alloys

Optimize strength-to-weight ratios, ensure extreme temperature resilience, and extend critical aircraft component operational lifespans under intense stress.

SCROLL

Engineered for Next-Gen Aerospace Challenges

Advanced aerospace-grade titanium manufacturing designed to withstand high mechanical loads, extreme thermal cycling, and harsh flight environments.

Jet Engines & Turbines

High-temperature titanium alloys (Ti-6242 & Grade 5) tailored for compressor blades, disc rotors, and engine nacelles subjected to high thermal stress.

Airframes & Structural Framing

Ultra-high-strength Ti-6Al-4V ELI (Grade 23) components engineered for wing spars, fuselage bulkheads, and fatigue-critical primary airframe structures.

Spacecraft & Rocket Propulsion

Cryogenic-capable titanium alloys designed for liquid propellant tanks, rocket engine nozzles, and structural payload adaptors for satellite launchers.

Landing Gear & High-Stress Fasteners

Beta titanium alloys (Ti-10V-2Fe-3Al) manufactured for high-impact landing gear mechanisms, hydraulic tubing, and high-tensile aerospace rivets.

Aerospace-Grade Mill Products & Precision Components

Fully compliant with AS9100D, AMS standards, ASTM B265/B348, and ISO 9001 quality guidelines.

Ti-6Al-4V Aerospace Titanium Forgings
AS9100D / AMS 4928

Ti-6Al-4V (Grade 5) Aerospace Forgings

Precision die forgings, rings, and billets engineered for maximum structural integrity in flight-critical airframe and turbine applications.

  • Tensile Strength: ≥ 895 MPa
  • Ultra-Low Hydrogen Content Options
  • 100% Ultrasonic Flaw Detection Certified
Get Product Spec Sheet
Grade 23 Ti-6Al-4V ELI Aerospace Sheets and Plates
AMS 4907 / MIL-T-9046

Grade 23 (Ti-6Al-4V ELI) Sheets & Plates

Extra-low interstitial titanium plates offering superior damage tolerance and high fracture toughness for cryogenic tanks and outer skins.

  • Thickness: 0.5mm to 100mm
  • Superior Stress Corrosion Crack Resistance
  • Full AMS & Nadcap Flight Traceability
Inquire Plate Specs
Seamless Titanium Hydraulic Tubing
AMS 4944 / AMS 4945

Seamless Titanium Hydraulic Tubing

Ti-3Al-2.5V (Grade 9) high-pressure seamless tubing engineered for weight-saving aircraft hydraulic and fuel transport lines.

  • Operating Pressure: High-Pressure Rated
  • Flawless Cold-Worked Stress-Relieved Finish
  • Eddy Current & Hydrostatic Tested
Request Tubing Catalog
High-Temperature Ti-6242 Alloy Bars
AMS 4919 / AMS 4975

High-Temperature Ti-6242 Alloy Bars

Ti-6Al-2Sn-4Zr-2Mo bars designed for high-creep resistance and structural stability at continuous service temperatures up to 540°C.

  • High Creep Strength at Elevated Temps
  • Ideal for Compressor Blades & Impellers
  • 100% Microstructure & Grain Size Verified
Request Alloy Data Sheet

Field-Tested Flight Performance

Discover how Kintonti Metal delivers mission-critical material reliability for global aerospace and defense programs.

Commercial Aviation

Jet Engine Fan Blade Material Weight Optimization

Location: European Propulsion System Integrator

Challenge: Heavy structural weight and high fatigue wear on conventional nickel superalloys under high-cycle fatigue.

Solution: Supplied precision-forged AMS 4928 Ti-6Al-4V Titanium Bars and Billets with optimized microstructural grain size.

28%
Engine Weight Reduction
2.5x
Component Fatigue Life
Satellite & Space Defense

Cryogenic Propellant Tank Shell Manufacturing

Location: North American Commercial Space Program

Challenge: Embrittlement and micro-cracking risks during liquid nitrogen and hydrogen storage at sub-zero temperatures.

Solution: Manufactured high-purity AMS 4907 Titanium Grade 23 (Ti-6Al-4V ELI) Sheets with strict interstitial controls.

100%
Cryogenic Impact Pass-Rate
0
Zero Flaw Failures

Aerospace Titanium Alloy Selection Matrix

Technical reference guide for metallurgical selection across flight and defense systems.

Alloy Grade Composition Spec Key Performance Characteristics Best Used For
Grade 5 (Ti-6Al-4V) Alpha-Beta Titanium Alloy High strength-to-weight ratio, excellent fatigue resistance, high structural stability. Airframe structures, wing fasteners, rocket motor cases, engine nacelles.
Grade 23 (Ti-6Al-4V ELI) Ti-6Al-4V Extra Low Interstitial Enhanced damage tolerance, extreme fracture toughness, non-brittle at cryogenic temperatures. Spacecraft fuel tanks, deep-space pressure hulls, cryogenic fluid lines.
Ti-6242 (Ti-6242S) Ti-6Al-2Sn-4Zr-2Mo Superior thermal creep resistance and mechanical strength at elevated temperatures (up to 540°C). Jet engine compressor disks, turbine impellers, high-temp afterburner skins.

Aerospace Engineering FAQ

Technical insights and metallurgical guidance from our aerospace materials division.

Why is Ti-6Al-4V ELI (Grade 23) specified over standard Ti-6Al-4V (Grade 5) in aerospace applications?

Standard Grade 5 titanium offers exceptional strength, but Grade 23 (Ti-6Al-4V ELI) controls interstitial elements (oxygen, nitrogen, carbon, iron) to lower levels. This drastic reduction improves fracture toughness and ductility, preventing catastrophic brittle failure in high-stress, low-temperature, or cryogenic environment conditions common in aerospace platforms.

What aerospace certifications, AMS specifications, and traceability reports are provided?

Kintonti Metal complies fully with AS9100D and ISO 9001 certification standards. Every order includes complete Material Test Reports (MTR) meeting EN 10204 3.1 / 3.2 requirements, confirming full chemistry, mechanical properties, and heat treatment logs. All materials meet aerospace specifications including AMS 4928, AMS 4911, AMS 4907, and AMS 4945.

Does Kintonti Metal perform Non-Destructive Testing (NDT) on aerospace titanium forgings and bars?

Yes. All aerospace-bound titanium forgings, plates, and bars undergo rigorous Non-Destructive Testing (NDT). This includes 100% Ultrasonic Testing (UT) according to AMS 2631 / MIL-STD-2154, Liquid Penetrant Inspection (LPI), and grain microstructure analysis prior to dispatch.

How does aerospace titanium optimize fuel efficiency and structural performance?

Titanium provides roughly 40% to 45% weight savings compared to structural steel while offering equivalent tensile strength. By replacing heavier superalloys in airframes and engines with aerospace titanium, aircraft engineers significantly reduce total structural mass, leading to direct gains in fuel efficiency, payload capability, and range.

Ready to Launch Your Aerospace Titanium Project?

Get custom quotes, AMS technical specs, and Nadcap-ready certifications within 24 hours.