High-Performance Titanium Solutions for Offshore & Marine Engineering

Enhance structural integrity, eliminate fatigue failure, and achieve superior corrosion immunity in deepwater subsea structures, FPSO platforms, and marine equipment.

SCROLL

Engineered for Extreme Offshore Environments

Advanced marine-grade titanium mill products engineered to withstand high hydrostatic pressure, deepwater sour gas, splash zone oxidation, and severe dynamic stress.

Subsea Risers & Flowlines

High-strength Grade 29 and Grade 9 seamless titanium pipes engineered for stress-joint risers, dynamic catenary risers (DCR), and ultra-deepwater flowlines.

FPSO Topside & Firewater Systems

Lightweight Grade 2 piping networks, deluge firewater systems, and cooling water exchangers built to reduce platform topside weight while surviving splash-zone exposure.

Subsea Manifolds & Pressure Enclosures

Grade 5 (Ti-6Al-4V) thick-walled forged cylinders and housings designed for deepwater ROV tools, subsea electronics enclosures, and high-pressure wellheads.

Propulsion Systems & Marine Shafting

Precision-ground Grade 5 titanium drive shafts, waterjet impellers, and rudder components offering high fatigue strength and zero erosion-corrosion in turbulent seawater.

Marine-Grade Titanium Mill Products & Subsea Hardware

Fully compliant with NORSOK M-650, API 6A/17D, ASTM B381, ASTM B861, and DNV GL marine certification standards.

Seamless Titanium Heavy Wall Pipe ASTM B861
ASTM B861 / NORSOK M-630

Grade 9 & Grade 29 Titanium Riser Pipes

Heavy-wall seamless titanium alloy pipes engineered for stress joints, subsea risers, and high-pressure flowlines.

  • Sizes: 2" to 24" Outer Diameter
  • High Strength-to-Weight Ratio & Low Bending Flexural Modulus
  • 100% Ultrasonic & Radiographic NDT Inspection
Get Product Spec Sheet
Grade 5 Ti-6Al-4V Heavy Forgings and Blocks
ASTM B381 / Grade 5 (Ti-6Al-4V)

Forged Titanium Blocks & Subsea Cylinders

Forged Grade 5 titanium blocks, blind flanges, and heavy-wall forged sleeves for deepwater ROV and subsea manifold housings.

  • Forging Weight: Up to 5,000 kg per piece
  • Excellent Resistance to Hydrogen Embrittlement & High Hydrostatic Pressure
  • EN 10204 3.1 & DNV Third-Party Witnessed
Inquire Forging Specs
Offshore Firewater Titanium Piping Systems
ASTM B862 / ASME SB862

Welded Titanium Topside Piping Systems

Large-diameter Grade 2 welded titanium piping tailored for FPSO ballast systems, seawater cooling loops, and firewater deluge mains.

  • Nominal Size: DN50 to DN1200
  • 40%-50% Weight Saving Compared to Cu-Ni / Super Duplex
  • Zero Maintenance in Marine Splash Zones
Request Pipe Catalog
High Strength Titanium Fasteners and Marine Fittings
ASTM F467/F468 / Grade 5

Titanium Marine Fasteners & Fittings

Precision-machined Grade 5 & Grade 7 bolts, studs, nuts, and high-pressure hydraulic fittings for marine subsea flanges.

  • Thread Sizes: M6 to M100 / 1/4" to 4"
  • High Yield Strength (>828 MPa) with Zero Galvanic Corrosion
  • 100% Liquid Penetrant & Dimensional Certified
Request Fastener Data Sheet

Field-Tested Offshore & Subsea Performance

Discover how Kintonti Metal provides durable, high-strength titanium components for deepwater oil fields and demanding marine structures global wide.

Deepwater Subsea Project

Dynamic Stress Joint Titanium Riser Replacement

Location: North Sea Offshore Oil Field (2,000m Depth)

Challenge: Heavy dynamic bending fatigue and localized corrosion fatigue on steel stress joints leading to high replacement costs.

Solution: Manufactured heavy-wall Grade 29 Titanium (Ti-6Al-4V-ELI with Ru) Seamless Pipes providing superior flexibility and fatigue strength.

30+ Yrs
Design Fatigue Life
50%
Bending Stress Reduction
FPSO Vessel Conversion

Topside Seawater Firewater System Retrofit

Location: West Africa Offshore FPSO Project

Challenge: Severe weight overruns and pitting failures on traditional Cu-Ni 90/10 fire mains exposed to marine splash zones.

Solution: Supplied 4,500 meters of prefabricated ASTM B862 Grade 2 Titanium Welded Piping and forged flanges for total system retrofit.

42%
Topside Weight Saved
0
Maintenance Outages

Marine & Offshore Titanium Alloy Selection Matrix

Technical reference guide for metallurgical selection across deepwater subsea and marine engineering applications.

Alloy Grade Composition Spec Key Performance Characteristics Best Used For
Grade 2 Titanium Commercially Pure Titanium Excellent weldability, high ductility, complete immunity to general seawater corrosion up to 100°C. FPSO topside firewater mains, ballast lines, seawater cooling piping, plate heat exchangers.
Grade 5 (Ti-6Al-4V) Ti-6Al-4V Alpha-Beta Alloy High tensile strength (≥895 MPa), high fatigue strength, lightweight structure with low density ($4.43 g/cm^3$). Subsea pressure hulls, ROV frames, marine propulsion shafts, high-strength subsea fasteners.
Grade 9 (Ti-3Al-2.5V) Ti-3Al-2.5V Near-Alpha Alloy Intermediate strength between Gr.2 and Gr.5, superior cold formability, high pressure rating. Subsea hydraulic control lines, deepwater tubing coils, marine high-pressure pipe manifolds.
Grade 29 (Ti-6Al-4V-ELI Ru) Ti-6Al-4V ELI + Ruthenium Ultra-high fracture toughness, resistance to sour gas ($H_2S$/$CO_2$), and extreme crevice corrosion immunity in hot sea brine. Subsea dynamic risers, stress joints, deepwater wellhead tools, sour gas production lines.

Offshore Engineering FAQ

Technical insights and metallurgical guidance from our marine & energy materials division.

Why is titanium preferred over Super Duplex Stainless Steel (2507) for subsea structures?

While Super Duplex stainless steel (UNS S32750) provides high strength, it remains susceptible to pitting corrosion, crevice corrosion in stagnant seawater, and Cathodic Protection (CP) induced Hydrogen Induced Stress Cracking (HISC). Titanium alloys (Grade 2, 5, and 29) are completely immune to pitting in seawater at all ocean depths and temperatures, while exhibiting superior fatigue strength and zero HISC susceptibility under standard CP potentials.

How does using titanium reduce topside weight on offshore platforms and FPSOs?

Titanium has a density of only $4.51 g/cm^3$, which is roughly 56% that of steel or nickel alloys. Because titanium requires zero corrosion allowance in seawater design, pipe wall thicknesses can be significantly minimized. This results in a total piping system weight reduction of 40% to 50%, dramatically lowering platform payload requirements and jacket construction costs.

Are Kintonti Metal titanium products certified for offshore oil and gas standards?

Yes. All offshore-grade titanium pipes, forged blocks, and fittings are manufactured under strict compliance with NORSOK M-650 / M-630 specifications, API 6A / API 17D for subsea wellheads, and ASTM B381 / B861 standards. Material Test Certificates (MTC) are routinely provided per EN 10204 3.1 with optional DNV, ABS, or BV third-party inspection.

Which titanium alloy is recommended for deepwater subsea risers subject to high dynamic fatigue?

For deepwater dynamic risers and stress joints, Grade 29 titanium (Ti-6Al-4V-ELI with Ruthenium addition) or Grade 9 (Ti-3Al-2.5V) is strongly recommended. Grade 29 offers high yield strength (>758 MPa), exceptionally high fracture toughness ($K_{IC}$), a low elastic modulus (roughly half that of steel), and total immunity to sour gas ($H_2S$) and hot brine cracking.

Ready to Upgrade Your Offshore & Subsea Equipment?

Get custom quotes, NORSOK/API technical specifications, and EN 10204 3.1 mill test certificates within 24 hours.